LF353
Wide bandwidth dual JFET-input operational amplifier
PDF datasheet
| | | | |
| 1OUT | 1 • | 8 | Vcc |
| 1IN- | 2 | 7 | 2OUT |
| 1IN+ | 3 | 6 | 2IN- |
| Vss | 4 | 5 | 2IN+ |
| | | | |
| Pin | Symbol | Description |
|---|
| 1 | 1OUT | output 1 |
| 2 | 1IN- | inverting input 1 |
| 3 | 1IN+ | non-inverting input 1 |
| 4 | Vss | negative supply voltage |
| 5 | 2IN+ | non-inverting input 2 |
| 6 | 2IN- | inverting input 2 |
| 7 | 2OUT | output 2 |
| 8 | Vcc | positive supply voltage |
Specifications
(typical values under recommended operating conditions, unless specified)| Parameter | Value | Unit |
|---|
| Supply voltage | 10 (min)
36 (max) | V |
| Offset voltage | 10 | mV |
| Gain bandwidth | 4 | MHz |
| Slew rate | 13 | V/µs |
| Settling time to 0.01% | 2 | µs |
| Voltage noise | 25 | nV/√Hz |
| Supply current (per channel) | 1.8 | mA |
Note: Data is maintained by an independent source and accuracy is not guaranteed. Check with the manufacturer's datasheet for up-to-date information.